
Address Name Bit Description HW Reset
Value
Access
0x014 RX_AGGREGATE
[4] When asserted, indicates a change in
PCS-VLANE permutation. This status
bit clears on read.
1’b0 R
[3] When asserted, indicates a change in
lanes deskewed status. This status bit
clears on read.
1’b0 R
[2] When asserted, indicates a change in
PCS-VLANE tag drop position. This
status bit clears on read.
1’b0 R
[1] When asserted, indicates that all lanes
are locked and lane-to-lane deskew is
complete so that the 40-100GbE IP core
is in operating normally.
1’b0 R
[0] When asserted, indicates that all lanes
are word and alignment marker locked.
1b’0 R
Bit Error Flag Registers
Bit errors occur naturally from time to time on high speed serial links. The higher level Ethernet protocol
includes mechanisms to respond to errors and tally them appropriately. These lower level flags are useful
for tracking errors in a physical link and computing error rates.
Table 3-29: Bit Error Flag Registers
Address Name Bit Description HW
Reset
Value
Access
0x015 FRAMING_ERR
[31] When asserted, indicates that a framing error
has occurred on any lane. This status bit
clears on read.
1’b0 R
[19:0] When asserted, indicates that a framing error
has occurred on the corresponding physical
lane. This status bit clears on read.
0x0000
0
R
0x016 BIP_ERR [19:0] When asserted, indicates that a BIP (lane
parity) error has occurred on the
corresponding physical lane. This status bit
clears on read.
0x0000
0
R
3-86
Bit Error Flag Registers
UG-01088
2014.12.15
Altera Corporation
Functional Description
Send Feedback
Commenti su questo manuale