Altera DisplayPort MegaCore Function Manuale Utente Pagina 58

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 195
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 57
Figure 5-10: rxN_audio Data Output
Audio Sample Period
rxN_audio_lpcm_data
rx_ss_clk
rxN_audio_valid
The captured audio infoframe is available on the audio port. The 5-byte port corresponds to the 5 bytes
used in the audio infoframe (refer to CEA-861-D). The audio infoframe describes the type of audio
content.
MSA Interface
The rxN_msa_conduit ports allow designs access to the MSA and VB-ID parameters on a top-level port.
The following table shows the 217-bit port bundle assignments. The prefixes msa and vbid denote
parameters from the MSA and Vertical Blank ID (VB-ID) packets, respectively.
The sink asserts bit msa_valid when all msa_ signals are valid and deasserts during MSA update. The sink
assigns the MSA parameters to zero when it is not receiving valid video data.
The sink asserts the msa_lock bit when the MSA fields have been correctly formatted for the last 15 video
frames. Because msa_lock changes state only when msa_valid = 1, you can use its rising edge to strobe
new MSA values following an idle video period; for example, when the source changes video resolution.
You can use its deasserted state to invalidate received video data.
The sink asserts bit vbid_strobe for one clock cycle when it detects the VB-ID and all vbid_ signals are
valid to be read.
Table 5-14: rxN_msa_conduit Port Signals
Bit Signal Comments
216
msa_lock
0 = MSA fields format error. 1 = MSA fields correctly
formatted.
215
vbid_strobe
0 = VB-ID fields invalid, 1 = VB-ID fields valid.
5-22
MSA Interface
UG-01131
2015.05.04
Altera Corporation
DisplayPort Sink
Send Feedback
Vedere la pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 194 195

Commenti su questo manuale

Nessun commento