Altera Serial Digital Interface (SDI) MegaCore Function Manuale Utente Pagina 91
- Pagina / 140
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 4: SDI Audio IP Cores 4–3
SDI Audio Embed MegaCore Function
February 2013 Altera Corporation Serial Digital Interface (SDI) MegaCore Function
User Guide
Parameters
Table 4–1 lists the parameters for the SDI Audio Embed MegaCore function.
Table 4–1. SDI Audio Embed MegaCore Function Parameters
Parameter Value Description
Number of supported audio
groups
1, 2, 3, 4
Specifies the maximum number of audio groups supported.
Each audio group consists of 4 audio channels (2 channel
pairs). You must specify all the four channels to the same
sample frequencies.
Async Audio Interface On or Off
Turn on to enable the Asynchronous input. In this mode, the
audio clock provides higher than 64* sample rate.
Frequency of fix_clk
0, 24.576, 25, 50, 100,
200
Specifies the frequency of the
fix_clk
signal.
Channel status RAM 0, 1, 2
Enables storage of the custom channel status data.
Select 1 to generate a single channel status RAM, or 2 to
generate separate RAMs for each input audio pair.
Frequency sine wave generator On or Off
Turn on to enable a four-frequency sine wave generator. You
can use the four-frequency sine wave generator as a test source
for the audio embedder.
Include clock On or Off
Turn on to enable a 48-kHz pulse generator synchronous to the
video clock. You can use the 48-kHz pulse generator to request
data from a sample rate convertor.
When you turn on the Frequency Sine Wave Generator
parameter, the core automatically includes this pulse generator.
Include Avalon-ST interface On or Off
Turn on to include the SDI Clocked Audio Output MegaCore.
When you turn on this parameter, the Avalon-ST interface
signals in Table 4–14 appear at the top level. Otherwise, the
audio input signals in Table 4–4 appear at the top level.
Include Avalon-MM control
interface
On or Off
Turn on to include the Avalon-MM control interface.
When you turn on this parameter, the register interface signals
in Table 4–7 appear at the top level. Otherwise, the direct
control interface signals in Table 4–6 appear at the top level.
- User Guide 1
- Contents 3
- Chapter 4. SDI Audio IP Cores 4
- Appendix A. Constraints 5
- Appendix B. Clocking 5
- Features 7
- Release Information 8
- Device Family Support 8
- General Description 9
- Notes to Table 1–5: 10
- OpenCore Plus Evaluation 11
- Resource Utilization 12
- 2. Getting Started 15
- Design Flow 16
- SDI Walkthrough 17
- Parameterizing 19
- Setting Up Simulation 20
- Generating Files 20
- - SD 270 Mbps 22
- - HD 1.485 Gbps 22
- - 3G 2.97 Gbps 22
- Simulating the Design 23
- Specifying Constraints 25
- Multiple Channels 26
- Compiling the Design 28
- Programming a Device 28
- Setting Up Licensing 29
- 3. Functional Description 31
- Block Description 32
- HD-SDI LN Insertion 34
- Scrambling and NRZI Coding 35
- Transceiver Clock 35
- Receiver 36
- Word Alignment 38
- Video Timing Flags Extraction 39
- RP168 Switching Compliance 39
- HD-SDI LN Extraction 40
- HD-SDI CRC Checking 40
- Accessing Transceiver 40
- Transmitter 42
- Transmitter Clocks 42
- Receiver Clocks 43
- Notes to Table 3–5: 44
- Notes to Figure 3–8: 44
- Figure 3–9. Receiver Clocks 46
- rxdata 47
- Note to Table 3–7: 50
- Notes to Figure 3–11: 51
- Figure 3–12. Receiver Clocks 53
- New TRS reasserts 55
- Stratix IV GX 57
- Note to Table 3–10: 58
- Note to Table 3–11: 58
- Notes to Figure 3–18: 60
- Note to Figure 3–19: 61
- User Logic 62
- Encrypted SDI IP Core 62
- Cyclone IV GX 63
- Notes to Table 3–12: 70
- Note to Table 3–13: 70
- Note to Table 3–14: 71
- Note to Figure 3–30: 77
- Notes to Figure 3–33: 78
- signal in 82
- Table 3–18 on page 3–50 82
- Notes to Figure 3–40: 83
- Notes to Table 3–19: 85
- MegaCore Verification 87
- 4. SDI Audio IP Cores 89
- Functional Description 90
- Note to Table 4–4: 93
- Note to Table 4–5: 94
- MegaCore function 100
- Register Maps 103
- Parameters 105
- AES Format 109
- Avalon-ST Audio Interface 109
- Note to Figure 4–6: 110
- Instantiating the IP Cores 111
- Simulating the Testbench 112
- Design Example 113
- Components 114
- Hardware Setup 116
- D6 D7 D8 D9 D10 D11 D12 D13 118
- A. Constraints 123
- Notes to Figure A–1: 124
- (gxb_rxclk 125
- Specify Clock Characteristics 126
- Set Multicycle Paths 127
- 337.5-MHz Zero-degree Clocks 128
- Minimize Timing Skew 129
- Non Cyclone Devices 130
- Cyclone Devices Only 131
- A–10 Appendix A: Constraints 132
- B. Clocking 133
- B–2 Appendix B: Clocking 134
- C. Receive and Retransmit 135
- Loopback FIFO Buffer 136
- Additional Information 137
- Info–2 Additional Information 138
- Document Revision History 138
- How to Contact Altera 139
- Typographic Conventions 139
- Info–4 Additional Information 140
Prodotti e manuali riguardandi Strumenti di misura Altera Serial Digital Interface (SDI) MegaCore Function
Strumenti di misura Altera Stratix V Avalon-MM Interface for PCIe Solutions Manuale Utente
(184 pagine)
(184 pagine)
Strumenti di misura Altera OCT Manuale Utente
(10 pagine)
(10 pagine)
Strumenti di misura Altera Embedded Systems Development Kit, Cyclone III Edit Manuale Utente
(82 pagine)
(82 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale