Altera Video and Image Processing Suite Manuale Utente Pagina 265

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 310
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 264
Parameter Value Description
Color planes transmitted in
parallel
On or Off
Turn on to transmit all the color planes at
the same time in parallel.
Turn off to transmit all the color planes in
series.
Pixels in parallel 1, 2, or 4 Specify the number of pixels in parallel that
the video pipeline is configured for.
Note: You must specify this parameter
value to 1 to capture video data
frames.
Bit width of capture interface(s)
8
16
32
64
128
Select the data bus width of the Avalon-ST
interface sending the captured information.
Capture video pixel data On or Off Turn on to enable the inclusion of hardware
that allows the monitor to capture video data
frames.
Note: This parameter only functions if
you specify the number of pixels in
parallel to a value of 1.
Avalon-ST Video Monitor Signals
Table 21-3: Avalon-ST Video Monitor Signals
Signal Direction Description
clock_clk Input All signals on the monitor are synchronous to this clock.
Drive this signal from the clock which drives the video
components that are being monitored.
Note: Do not insert clock crossing between the
monitor and the trace system component. You
must drive the trace system’s clock from the
same source which drives this signal.
reset_reset Input This signal only resets the debugging parts of the monitor.
It does not affect the system being monitored. Drive this
signal directly from the reset_reset output of the trace
system component.
21-4
Avalon-ST Video Monitor Signals
UG-VIPSUITE
2015.05.04
Altera Corporation
Avalon-ST Video Monitor IP Core
Send Feedback
Vedere la pagina 264
1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 309 310

Commenti su questo manuale

Nessun commento