Altera Low Latency Ethernet 10G MAC Manuale Utente Pagina 63

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 109
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 62
Word
Offset
Register Name Description Access HW Reset
Value
0x0044 tx_pauseframe_enable
Bit 0—configures the transmission of
pause frames. This bit affects pause
frame requests from both register and
vector settings.
0: Disables pause frame transmission.
1: Enables pause frame transmission, if
TX path is enabled by tx_packet_
control.
Bits 2:1—specifies the trigger for pause
frame requests.
00: Accepts pause frame requests only
from vector setting, avalon_st_pause_
data.
01: Accepts pause frame requests only
from register setting, tx_pauseframe_
control.
10 / 11: Reserved.
Bits 31:3—reserved.
Configure this register before you enable
the MAC IP core for operations.
RW
0x1
0x0046 tx_pfc_priority_enable
(5)
Enables priority-based flow control on the
TX datapath.
Bits 7:0—setting bit n enables priority-
based flow control for priority queue n.
For example, setting tx_pfc_priority_
enable[0] enables queue 0.
Bits 31:8—reserved.
Configure this register before you enable
the MAC IP core for operations.
RW 0x0
0x0048 pfc_pause_quanta_0
(5)
Specifies the pause quanta for each priority
queue.
Bits 15:0—pfc_pause_quanta_n[15:0]
specifies the pause length for priority
queue n in quanta unit, where 1 unit =
512 bits time.
Bits 31:16—reserved.
Configure these registers before you enable
the MAC IP core for operations.
RW 0x0
0x0049 pfc_pause_quanta_1
(5)
0x004A pfc_pause_quanta_2
(5)
0x004B pfc_pause_quanta_3
(5)
0x004C pfc_pause_quanta_4
(5)
0x004D pfc_pause_quanta_5
(5)
0x004E pfc_pause_quanta_6
(5)
0x004F pfc_pause_quanta_7
(5)
(5)
This register is used only when you turn on the Enable preamble pass-through mode option. It is reserved
when not used.
UG-01144
2014.12.15
Flow Control Registers
4-11
Configuration Registers for LL Ethernet 10G MAC
Altera Corporation
Send Feedback
Vedere la pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 108 109

Commenti su questo manuale

Nessun commento